Getting Crafty – Making your own recycled mosaic mirror

This project is a great way to make use of any unwanted ceramic tiles after refurbishing your kitchen or bathroom. This project is for beginners and could be a great activity for the kids (with parental supervision of course). Recycling those unwanted pieces of ceramic tile to create a mirror is a great, eco-friendly way to decorate the house and also makes a great gift.

You will need the following items (always check to see if you have any of these things around the house before you go out and buy them).

 

G10m2728. Kirsten Makin. Graduation Reply Slip

-A Mirror
Buy a new mirror (if you have to) or use an old one that needs a bit of sprucing up.
Make sure when you choose the size of your mirror you are also taking into consideration the size of the mosaic border you want to create around the centre of the mirror.

Gloves, face-mask, safety goggles (And any other protective equipment you need to style yourself DIY-ready)

-A Strong Adhesive (Sticky stuff)

Some form of ceramic tile adhesive would be best but check with your hardware-person if you are unsure.

Tile cutting tools, Pliers or Nippers
Again, check with your hardware person if you are unsure as to what will work best. It is also wise to make sure that those handling the tools do so with the proper care and supervision.
Grout (The stuff that goes in-between the tiles)
This can be your usual tile grout. Try to get it in white but grey will also do fine.
– Palette Knife
The palette knife can be used to apply the grout.
– A Sponge/ Cloth
To wipe down the tiles after you have applied the grout.
Sandpaper

Paper, pens/pencils and a ruler/tapemeasure
And last but not least-
Old ceramic tiles, bits of wood, stone, glass and whatever else you would like to add to your mosaic.
Side note: Everyone is free to use their creative license and go carte blanche with this project. If however you feel like you need some help why not get onto google and look up some mosaic patterns and colour schemes? There is no harm is seeking inspiration.

Now that you have all your tools and equipment here is what you do-

1. Blueprints

– Draw/sketch your mosaic mirror design onto your piece of paper. Try to use the correct measurements and make sure your mosaic border does not take over the whole surface of the mirror.

G10m2728. Kirsten Makin. Graduation Reply Slipyyy

2. Prepare your mirror

– Make sure the mirror is clean and dry. Consider protecting the mirror with painter’s tape and wax paper (a great suggestion by http://crafts.creativebug.com/make-tiled-mosaic-mirror-1283.html)

-Using a ruler or tape measure plan where you want your border to go. Use a non-residue tape (like scotch/magic tape) to make the boundary extra clear.

-Grab your sandpaper (gloves are option but do add badass-DIY cred)

– Now “scuff” the mirror using the sandpaper. Be careful to only scuff the area marked off as the border. Do not scuff the glass that will later be used as the mirror. Do not sandpaper all the way through to the base of the mirror.
– Dust off using cloth

3. Start mosaic-ing

– Cut the tiles/ ceramic pieces and whatever you have decided to use into the desired size and shape (This can be done prior). Please be extra cautious when using tile cutters and other sharp objects. Gloves and Goggles aren’t a bad idea at this point.

Here is a helpful tip from Creative Bug, “Break ceramics for use as mosaic tiles by placing them in a plastic bag, wrapping the bag in a towel and striking it with a hammer.”

– Arrange them into the shape/design that you want. Here is when you refer back to your blueprint.

– Using your tile adhesive (it’s a good idea to follow the instructions on the back of the bottle as to the drying time of the glue) stick the mosaic pieces to the mirror in the demarcated area. Put the adhesive onto the area in which you wish to stick the tiles
– Give the adhesive an adequate amount of drying time.

4. Grouting

– Mix the grout as per the instructions on the packaging

– Apply the grout to the gaps between the tiles. Using the palette knife (if you are using your fingers you should be wearing your gloves)

G10m2728. Kirsten Makin. Graduation Reply Slipyyyhyujyu

– Once the grout has been applied wipe the tiles clean using your sponge/cloth. Please take careful note of grout drying time so as not to allow grout to dry on the tiles.
– Allow to dry

5. Make sure the mirror itself has not grout on its surface. Wipe down the mirror before leaving to dry

6. Allow 24 hours to dry

7. Dispose of everything correctly

8. Hang your mirror is a featured spot and enjoy

 

*If you are ever unsure about anything, seek help.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s